Using the Standard TCP/IP Port
35
2
L
LL
L
Enter the printer name or IP address in the [Printer Name or IP Address] box.
The [
Port Name
] text box automatically obtains a port name. Change this name
if necessary.
When screen for Device selection appears, select "RICOH NetworkPrinter
Driver C Model".
M
MM
M
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
The installation start dialog box reappears.
N
NN
N
Check that the port of the selected printer is displayed in [Port:].
O
OO
O
Configure the default printer as necessary.
P
PP
P
Click [Finish].
The printer driver installation starts.
Q
QQ
Q
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete. Restart the computer and reinstall other software pro-
grams or printer drivers.
Reference
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run.
If you still want to install the printer driver, use [Add Printer]. See p.58 “If a
Message Appears during Installation”.
MartiniC25-GB-Pref-F7_FM.book Page 35 Tuesday, November 9, 2004 3:46 PM
To Next Page
Loading...
