Getting Started
12
1
8. Operation switch
Press to turn the power on (the On indi-
cator lights). To turn the power off, press
again (the On indicator goes off).
9. Control panel
See p.14 “Control Panel”.
10. Front cover
Open to access the inside of the machine.
11. Paper tray (Tray 1)
Load paper here.
12. Paper tray unit (Tray 2)
See p.13 “Other Items”.
13. Internal tray guide
Open out to support large paper and
raise the end fence.
1. Bypass tray
Use to copy onto OHP transparencies,
adhesive labels, translucent paper, enve-
lopes, and custom size paper.
2. Right cover
Open this to remove jammed paper fed
from the paper tray.
3. Lower right cover
Open this to remove jammed paper from
the paper tray unit.
ABU047S
ABU
S.eps
To Next Page
Loading...
