Ricoh AFICIO 1515 MF - B/W Laser - All-in-One - Changing the Paper Size in the Paper Tray Unit (Tray 2)

Troubleshooting
78
4
F Square the paper and load it in
the tray.
Important
 Be sure to load the paper under
the roller.
 Do not stack paper over the lim-
it mark.
G While pressing the release lever,
adjust the side fences to the new
paper size.
Important
 When setting small quantities of
copy paper, be careful not to
squeeze in the side fences too
much or paper will not feed in
properly.
H While pressing the release lever,
set the back fence to the new size.
I Push the paper tray in until it
stops.
Changing the Paper Size in the
Paper Tray Unit (Tray 2)
A Make sure the paper tray is not in
use.
B Pull out the paper tray until it
stops.
Note
 Remove any remaining copy
paper.
C While pinching the release lever,
adjust the back fence.
ABU049S
ABU
049
S.eps
ABU045S
ABU
045
S.eps
ABU046S
ABU
046
S.eps
ZFOY
370
E.eps