Ricoh AFICIO 1515 MF - B/W Laser - All-in-One - Deleting a User Code

User Tools (System Settings)
48
3
Deleting a User Code
A Press the {User Tools/Counter} key.
B Select [System Settings] using {U}
or {T}, and then press the {OK} key.
C Select [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
D Select [Address Book Management]
using {U} or {T}, and then press
the {OK} key.
E Select [Program/Change] using {U}
or {T}, and then press the {OK} key.
Note
 Select [Delete] if you want to de-
lete all user information.
F Press [Search].
Note
 You can also enter the registra-
tion number of the user (destina-
tion) using the number keys or
the Quick Dial keys. After enter-
ing the number, press the {OK}
key, and then proceed to step
I
.
 You can also search the regis-
tered user code by name, regis-
tered number, user code, fax
number or e-mail address. See
p.70 “Using the Search Function
to Select a Destination”.
G Select [Display Destination List] us-
ing {U} or {T}, and then press the
{OK} key.
H Select the user (destination) whose
code is to be deleted using {U} or
{T}, and then press the {OK} key.
I Press the {OK} key.
J Press [UserCode].
Note
 If you selected [Delete] in step
E
,
press [Yes] to delete all user in-
formation, and then proceed to
step
M
.
K Press the {Clear/Stop} key, and
then press the {OK} key.
L Press the {OK} key.
The “
Programmed” message ap-
pears, and then the “Address
Book” display returns.
ZEN
018
.t
if
ZEN
019
.t
if
ZEN
024
.t
if
ZEN
028
.t
if
ZEN
038
.t
if
ZEN
039
.t
if