3
1. Windows Configuration
Using the DeskTopBinder -
SmartDeviceMonitor for Client Port
Installing DeskTopBinder - SmartDeviceMonitor for Client
Important
❒
To install DeskTopBinder - SmartDeviceMonitor for Client under Windows 2000
/ XP Professional, Windows Server 2003, and Windows NT 4.0, you must have
an account that has Manage Printers permission. Log on as an Administrator.
❒ Install DeskTopBinder - SmartDeviceMonitor for Client before installing the
printer driver when using the DeskTopBinder - SmartDeviceMonitor for Cli-
ent port.
A Quit all applications currently running.
B Insert the CD-ROM into the CD-ROM drive.
The installer starts.
C Select an interface language, and then click [OK].
The default interface language is English.
D Click [DeskTopBinder - SmartDeviceMonitor for Client].
E Select an interface language, and then click [OK].
The default interface language is English.
F The message to quit all other applications appears. Quit all applications,
and then click [Next >].
G The software license agreement appears in the [License Agreement] dialog
box. After reading through its contents, click [Yes].
H
Follow the instructions on the display and click
[
Next >
]
to proceed next step.
I After the installation is completed, select one of the options to restart the
computer either now or later, and click [Complete].
Restart the computer to complete installation.
Note
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete.
❒ Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
To Next Page
Loading...
