Windows Configuration
22
1
M Click [Next >].
N Specify whether or not to print a test page, and then click [Next >].
O Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory."
Installing the PostScript 3 Printer Driver (Windows NT 4.0)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ If your operating system is Windows NT4.0, download printer driver for
Windows NT4.0 from the supplier's Web site.
A Double-click on "SETUP.EXE" in the downloaded folder.
Add Printer Wizard starts.
B Select [My Computer], and then click [Next >].
C Click [Add Port...].
D Select [LPR Port], and then click [New Port...].
E Enter the printer's IP address in the [Name or address of server providing lpd]
box.
F Enter “lp” in the [Name of printer or print queue on that server:] box, and then
click [OK].
G Click [Close] to close the [Printer Port] dialog box.
H Click [Next >].
I Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
J Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
K Specify whether or not to share the printer, and then click [Next >].
To Next Page
Loading...
