Windows Configuration
12
1
L Click [Detailed Settings] to make necessary settings.
For information about the settings, see DeskTopBinder - SmartDeviceMoni-
tor for Client Help.
M Click [OK].
N Check that the name of the printer driver you want to install is selected, and
then click [Next >].
O Change the name of the printer if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
P Specify whether or not to print a test page, and then click [Next >].
Q Click [Finish].
The printer driver installation starts.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch “Setup.exe” on the CD-ROM root directory.
Installing the PostScript 3 Printer Driver (Windows NT 4.0 - TCP/IP)
Important
❒ Installing this printer driver requires Administrators permission. Log on us-
ing an account that has Administrators permission.
❒ If your operating system is Windows NT4.0, download printer driver for
Windows NT4.0 from the supplier's Web site.
A Double-click on "SETUP.EXE" in the downloaded folder.
Add Printer Wizard starts.
B Select [My Computer], and then click [Next >].
C Click [Add Port...].
D Click [DeskTop Binder-SmartDeviceMonitor], and then click [New Port...].
E Click [TCP/IP], and then click [Search].
A list of printers using [TCP/IP] appears.
F Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], and then enter the IP address
or host name of the machine.
To Next Page
Loading...
