Printer Utility for Mac
80
4
Downloading PS Fonts
You can download the PS fonts to the printer's memory.
Important
❒ The following procedures to download the fonts assume that you are a sys-
tem administrator. If you are not, be sure to consult your system administra-
tor.
❒ If the printer restarts, all the printer settings return to their defaults.
❒ Confirm that a Mac OS and the printer are connected with Appletalk.
❒ During the download, do not turn off the power switch, operate the panel or
open or close the cover.
A Select [Download PS Fonts...] on the [File] menu.
B Click [Add to list].
The dialog box to select fonts appears.
C Click to select the desired font files, and then click [Open].
The list of selectable font names appears.
D After adding all the fonts you want to download, click [OK].
Under Mac OS X, click [choose].
The dialog box of selected fonts to download appears.
E Click [Download].
The fonts begin to download, and the download status is shown.
F When the completion message appears, click [OK].
G Click [Cancel].
Note
❒ Some fonts cannot be downloaded.
❒ Before downloading, read the documentation about the fonts you want to
use.
To Next Page
Loading...
