When the Authentication Screen is Displayed
17
1
Login (Using the Control Panel)
Use the following procedure to log in when Basic Authentication, Windows Au-
thentication, LDAP Authentication, or Integration Server Authentication is enabled.
A Enter the login user name, and then press the {OK} key.
B Enter the login password, and then press the {OK} key.
When the user is authenticated, the screen for the function you are using appears.
Logout (Using the Control Panel)
Use the following procedure to log out when Basic Authentication, Windows
Authentication, LDAP Authentication, or Integration Server Authentication is
enabled.
A Press the {User Tools/Counter} key.
B Press [Logout].
C Press [Yes].
StellaC3_Intro_F-AE_FM_forPaper.book Page 17 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
