Changing Modes
19
1
Changing Modes
Note
❒ You cannot switch modes during initial setup.
❒ The copy display is displayed as default after power on. You can change this
default setting. For the setting procedure, see “General Features”, General
Settings Guide.
❒ The following illustrations show screens that appear when fax and printer/scanner
are installed.
❖ System Reset
The screen specified in Function Priority appears automatically after a certain
period of time has elapsed. This function is called “System Reset”. You can
change the System Reset time. For the setting procedure, see “Timer Set-
tings”, General Settings Guide.
Reference
“General Features”, General Settings Guide
“Timer Settings”, General Settings Guide
ARC040S
StellaC3_Intro_F-AE_FM_forPaper.book Page 19 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
