Appendix
54
3
Unusable Paper
This section describes which types of paper are unusable on this machine.
CAUTION:
Important
❒ To prevent faults, do not use any of the following kinds of paper:
• Paper for inkjet printers
•Thermal fax paper
• Art paper
• Aluminum foil
•Carbon paper
•Conductive paper
•Paper with perforated lines
• Hemmed-edge paper
•Tab stock
❒ Faults can occur if you copy onto sides that are already printed. Take care to
copy onto unprinted sides only.
Note
❒ To prevent misfeeds, do not use the following kinds of paper:
• Bent, folded, or creased paper
• Torn paper
• Slippery paper
• Perforated paper
• Rough paper
• Thin paper with little stiffness
• Paper with a dusty surface
❒ If you copy onto rough grain paper, the image might be blurred.
• Do not use aluminum foil, carbon paper, or similar conductive paper to
avoid a fire or machine failure.
StellaC3_Intro_F-AE_FM_forPaper.book Page 54 Friday, August 25, 2006 1:43 PM
To Next Page
Loading...
