4. Enter the number to start counting from with the number keys, and then press [ ].
5. Press [OK] twice.
• To change the value you entered, press [Clear], and then enter a new value.
•
You can enter a number between 1 and 9999.
• You can change the settings for Background Numbering under Stamp in User Tools. For details
about Stamp, see “Stamp”.
• The numbers appear to overlap the copied image in some cases.
• p.212 "Stamp"
Preset Stamp
Messages are stamped on copies.
• You cannot use the bypass tray with this function.
•
Only one message can be stamped at a time.
The following eight messages are available for Preset Stamp:
Stamps
125
To Next Page
Loading...
