4. Press the key to select the chapter number.
To select pages 11 to 20 (chapter), press [11-20].
5. Enter the page location of the first page of the chapter with the number keys, and then
press the [ ] key.
6. To specify another page location, repeat steps 3 to 5.
Up to 20 locations can be specified.
7. Select the main sheet tray that contains the paper to copy the originals.
8. After making all settings, press [OK] twice.
• To change the value you entered, press the key you want to change, and then enter a new value.
• The designation sheets should be the same size and orientation as the main sheets.
• If you select [Designate: Blank], the specified pages will be excluded from the copy count.
• When Duplex (1 Sided 2 Sided) has been selected, specified pages will always be copied on
the front of copies in the same way as in Chapters mode.
Chapters
The page locations you specify with this function will appear on the front of copy sheets.
3. Advanced Copying
168
3
To Next Page
Loading...
