Default: [All Pages]
User Stamp
This section describes the user tools in the User Stamp menu under Stamp.
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favorite designs.
For details about how to program the user stamp, see “User Stamp”.
Stamp Format:1 4
Specify how each of registered user stamps 1 to 4 is printed.
•
Stamp Position
Specify where to print the user stamp.
Default: [Top Right]
• Adjust Stamp Position
You can adjust the position of the user stamp within the available ranges shown below.
(mainly Europe and Asia)
“Top Left” T/B: 4 144 mm, L/R: 4 144 mm
“Top Centre” T/B: 4 144 mm, L/R: 72 72 mm
“Top Right” T/B: 4 144 mm, L/R: 4 144 mm
“Centre Left” T/B: 72 72 mm, L/R: 4 144 mm
“Centre” T/B: 72 72 mm, L/R: 72 72 mm
“Centre Right” T/B: 72 72 mm, L/R: 4 144 mm
“Bottom Left” T/B: 4 144 mm, L/R: 4 144 mm
“Bottom Centre” T/B: 4 144 mm, L/R: 72 72 mm
“Bottom Right” T/B: 4 144 mm, L/R: 4 144 mm
(mainly North America)
“Top Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Top Center” T/B: 0.1 5.7 inches, L/R: 2.8 2.8 inches
“Top Right” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
“Center Left” T/B: 2.8 2.8 inches, L/R: 0.1 5.7 inches
“Center” T/B: 2.8 2.8 inches, L/R: 2.8 2.8 inches
“Center Right” T/B: 2.8 2.8 inches, L/R: 0.1 5.7 inches
“Bottom Left” T/B: 0.1 5.7 inches, L/R: 0.1 5.7 inches
5. Copier and Document Server Features
214
To Next Page
Loading...
