Copying from the Bypass Tray
The bypass tray allows you to copy onto non-standard paper.
Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, and paper
that cannot be loaded in the paper trays.
• Paper that has a vertical length of 90.0 305.0 mm (3.55 12.00 inches) and a horizontal length
of 148.0 600.0 mm (5.83 23.62 inches) can be fed in from the bypass tray.
•
Paper that has a horizontal length of 433 mm (17 inches) or more is prone to creasing, feed
failures, and jamming.
• The machine can automatically detect the following sizes as regular size copy paper:
•
(mainly Europe and Asia)
•
A3
, A4 , A5 , B4 JIS , B5 JIS , B6 JIS
• (mainly North America)
•
11 × 17
, 8
1
/
2
× 11 , 5
1
/
2
× 8
1
/
2
• When copying onto custom size paper, paper will be delivered automatically to the internal tray.
•
If the paper you want to copy onto is not shown on the Paper Type screen or its paper weight is
between 82
105 g/m
2
(21 28 lb. Bond), you must specify the paper type under Tray Paper
Settings in User Tools. For details about Tray Paper Settings, see “System Settings”, Network and
System Settings Reference.
•
The maximum number of sheets you can load at the same time depends on paper type. Load only
as much paper as can be held between the paper guides on the bypass tray.
[Bypass Tray Usage]
Press [Bypass Tray Usage] to display a description on using the bypass tray.
2. Basic Copying
44
To Next Page
Loading...
