• We recommend that you use specified OHP transparencies.
•
Do not use OHP transparencies for color copying.
• When copying onto OHP transparencies, remove copied sheets one by one.
• The Duplex function cannot be performed on thick paper, OHP transparencies, or label paper. If [1
Sided
2 Sided] is selected, cancel the setting.
•
Select [Thick Paper] if the paper weight is 106 g/m
2
(28 lb. Bond) or greater.
1. Select tray 1, and then press the [
] key.
2. Press [Paper Type].
3. Select the paper type, and then press [OK].
4. Specify the paper size, and then press [OK] twice.
5. Place the originals, and then press the [Start] key.
• Special paper can also be loaded in the bypass tray. For the details about copying onto special
paper, see “Copying onto Special Paper from the Bypass Tray”.
•
The maximum limit for stacking special paper is different to that for plain paper. For details, see
“Recommended Paper Sizes and Types”, About This Machine.
• p.50 "Copying onto Special Paper from the Bypass Tray"
Copying onto Envelopes from Tray 1
This section describes how to copy onto envelopes from tray 1.
2. Basic Copying
40
To Next Page
Loading...
