1. Placing Originals
This chapter describes the types of originals you can set and how to place originals.
Originals
This section describes the types of originals that can be placed, paper sizes that are automatically
detected, and missing image area.
Sizes and Weights of Recommended Originals
The following describes recommended paper sizes and non-recommended originals:
Original location Original size Original weight
Exposure glass Up to A3, 11 × 17
ADF One-sided originals:
A3 A5 , 11 × 17 5
1
/
2
× 8
1
/
2
40 128 g/m
2
(11 34 lb.
Bond)
Two-sided originals:
A3 A5 , 11 × 17 5
1
/
2
× 8
1
/
2
52 105 g/m
2
(14 28 lb.
Bond)
11 × 17: 64
105 g/m
2
(17 28 lb.
Bond)
• About 50 originals can be loaded in the ADF.
Non-compatible originals for the Auto Document Feeder
Placing unsuitable originals in the ADF can cause paper misfeeds or black lines, or result in damage to
the originals.
Place the following types of originals on the exposure glass instead.
•
Originals other than those specified on “Sizes and Weights of Recommended Originals”
• Stapled or clipped originals
17
To Next Page
Loading...
