• When you place a thick book or three-dimensional original on the exposure glass and lower the
ADF, the back side of the ADF rises up to accommodate the original. Keep your hands away from
the hinges at the back of the ADF when you close it.
• For details about how to specify the original size, see “Specifying Original Sizes”.
• When the Sort, Combine, or 1 Sided 2 Sided function has been set, press the [ ] key after all
originals have been scanned.
• p.30 "Specifying Original Sizes"
Placing Originals in the Auto Document Feeder
Place originals in the ADF.
Be sure not to block the sensor or load the original untidily. Doing so may cause the machine to detect
the size of the original incorrectly or display a paper misfeed message. Also, be sure not to place
originals or other objects on the top cover. Doing so may cause a malfunction.
1
1. Sensors
Settings should be made in the following situations:
Placing Originals
25
1
To Next Page
Loading...
