When the number of originals placed in the ADF exceeds the limit:
See “Batch Mode”.
When placing originals one by one:
See “SADF Mode”.
When copying originals of various sizes:
See “Mixed Sizes Mode”.
1. Adjust the document guide to the original size.
2. Set the aligned originals face up into the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
1
2
1. Limit mark
2. Document guide
• For details about how to specify the original size, see “Specifying Original Sizes”.
• Straighten curls in the originals before placing them in the ADF.
• To prevent multiple sheets from being fed at once, fan the original before placing it in the ADF.
• Set the original squarely.
• p.27 "Batch Mode"
• p.27 "SADF Mode"
• p.28 "Mixed Sizes Mode"
• p.30 "Specifying Original Sizes"
1. Placing Originals
26
1
To Next Page
Loading...
