5. Select the paper size.
6. Press [OK] twice.
7. Place the originals, and then press the [Start] key.
Copying onto Custom Size Paper from the Bypass Tray
Makes copies onto custom size paper from the bypass tray.
• The Duplex function cannot be performed on custom size paper. If [1 Sided 2 Sided] is selected,
cancel the setting.
1. Open the bypass tray, and then insert the paper face down until you hear the beep.
2. Align the paper guides to the paper size.
3. Press [Bypass], and then press the [ ] key.
4. Press [Paper Size].
5. Press [Custom Size].
Copying from the Bypass Tray
47