1. Press [Edit / Stamp].
2. Press [Stamp].
3. Press [User Stamp].
4. Select the stamp you require.
You can change the stamp position.
5. Press [All Pages] or [1st Page Only] to select the print page.
6. After making all settings, press [OK].
7. Press [OK].
• You can change the settings for User Stamp under Stamp in User Tools. For details about Stamp,
see “Stamp”.
• p.130 "Registering a user stamp"
•
p.212 "Stamp"
Changing the stamp position
Changes the stamp position.
Stamps
129
To Next Page
Loading...
