1. Press [Dup./Combine/Series].
2. Press [Book].
3. Select a book type separately for the original ([1 Sided] or [2 Sided]) and copy ([Booklet]
or [Magazine]), or select a book type from [Book 2 Sided] and [Front&Back 2
Sided].
If you specified [2 Sided] for the original, [Book 2 Sided], or [Front&Back 2 Sided], you can
specify the orientation of originals or copies. For details, see “Originals and Copy Orientation”.
4. Press [OK].
5. Select the paper size.
• When placing originals on the exposure glass, or in the ADF using Batch mode, press the [ ] key
after all the originals have been scanned.
•
The default setting for the orientation of Booklet and Magazine is [Open to Left]. You can change
the default under Orientation: Booklet, Magazine in User Tools. For details, see “Edit”.
• In the Booklet or Magazine mode, the machine sets the reproduction ratio automatically to meet
the paper size and copies the originals together onto the paper.
• The machine selects reproduction ratios of between 25 and 400%.
• If the calculated ratio is under the minimum ratio, it is automatically adjusted to within available
range. However, with some ratios, parts of the image might not be copied.
Advanced Copier Functions
163
To Next Page
Loading...
