Appendix
134
6
❖ Punch
Use this function to punch holes in the printed documents.
The following table shows where you can select this function.
Note
❒ Punch positions and the number of punch holes that are available will
change depending on the type of finisher, the original's orientation, and
the printing paper size and orientation.
❖ Z-fold
Use this function to select the Z-fold type in the printed documents.
The following table shows where you can select this function.
❖ Watermark
Set the Watermark function.
❖ Watermark Text
Select the Watermark Text type.
❖ Watermark Font
Select the Watermark Font type.
❖ Watermark Size
Select the Watermark size.
❖ Watermark Angle
Select the Watermark angle.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Punch] on [Print Job] on the [Finishing] tab in the Print-
ing Preference dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Z-fold] on [Print Job] on the [Finishing] tab in the Print-
ing Preference dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark] on the [Advanced] tab in the Printing Pref-
erences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark Text] on the [Advanced] tab in the Printing
Preferences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark Font] on the [Advanced] tab in the Printing
Preferences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark Size] on the [Advanced] tab in the Printing
Preferences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark Angle] on the [Advanced] tab in the Printing
Preferences dialog box.
To Next Page
Loading...
Need help?
General
