Notes to Users of the PostScript 3 Driver
135
6
❖ Watermark Style
Select the Watermark style.
❖ Dithering
Use this to set the Image Rendering mode.
The following table shows the tabs or menus where you can select this function.
You can select the following items:
•Auto
Use this setting to configure the best dithering method automatically de-
pending on the appearance of the document to be printed.
• Photographic
Performs dithering using an appropriate pattern for photographs.
•Text
Performs dithering using an appropriate pattern for text.
• User Setting
Use this setting to print images set in half tone in your application.
❖ Image Smoothing
Use this to select the image smoothing type.
The following table shows the tabs or menus where you can select this function.
•Off
Disables image smoothing.
•On
Performs image smoothing unconditionally.
•Auto
Performs image smoothing automatically for images that have a resolution
less than 25% of supported printer resolution.
• Less than 90 ppi - Less than 300 ppi
Performs image smoothing only when the image has an image resolution
(pixels per inch) less than the respective value you have selected in the list.
Note
❒ When [Auto] is selected, data processing may take a long time. When Image
Smoothing is used for a mask image, this function may have an undesired
effect on the print result.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Watermark Style] on the [Advanced] tab in the Printing
Preferences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Dithering] on [Document Options] on the [Advanced] tab
in the Printing Preferences dialog box.
Windows 2000/XP/Vista,
Windows Server 2003/2003 R2
[Image Smoothing] on [Document Options] on the [Ad-
vanced] tab in the Printing Preferences dialog box.
To Next Page
Loading...
Need help?
General
