Ricoh Aficio MP C3000 User Manual

Programs
135
6
Changing a Registered Program
To change the settings registered to a program:
A Press {Program}.
B Press [Recall].
C Press the number of the program you want to recall.
D Change settings of the program.
E Press the number of the program you want to recall.
F Press {Program}.
G Press the number of the program whose settings you changed or the number
of a different program in which you want to register the changed settings.
H If you select a program that is already registered, a confirmation message
appears. To overwrite the program, press [Yes].
If you select a new program number, you can omit this step. Proceed to the
next step.
I Enter a program name.
J Press [OK].
If overwritten, the registered program is deleted.
The new program name appears briefly, and then the initial screen reappears
after a moment.

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute