Sending Scan Files by E-mail
24
1
Registering a Directly-Entered Destination in the Address Book
This section explains how to register a directly-entered destination in the ma-
chine’s address book. You can also register a destination selected from the LDAP
server.
A In the destination field, display the destination you want to register.
B Press [Prg. Dest.].
C Press [Names], and then specify the name and other information to be registered.
For details about specifying the information to be registered, see General Set-
tings Guide.
D Press [OK].
Note
❒ Depending on the security setting, [Prg. Dest.] may not appear. In such case,
you cannot complete the registration.
❒ To register in the machine’s address book a destination searched for and
selected from the LDAP server, display the destination, and then press
[Prg. Dest.].
To Next Page
Loading...
