Ricoh Aficio MP C3000 User Manual

Simultaneous Storage and Sending by Scan to Folder
57
2
Simultaneous Storage and Sending by
Scan to Folder
This section explains how to store a file and simultaneously send it by Scan to
Folder.
A Press [Store File].
B Make sure that [Send & Store] is selected.
C If necessary, specify file data, such as [User Name], [File Name], and [Password].
For details, see "Specifying File Information for a Stored File".
D Press [OK].
E Specify the setting for sending the file by Scan to Folder, and then send the
file.
For details about sending a file by Scan to Folder, see "Basic Operations When
Using Scan to Folder".
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult the
administrator.
❒ If you simultaneously store scan files and send them by Scan to Folder, the
files cannot be retransmitted from the Scan to Folder screen. To retransmit
the files, select the files on the Select Stored File screen, and then send
them. For details, see "Sending a Stored File".
Reference
p.63 “Specifying File Information for a Stored File”
p.41 “Basic Operations When Using Scan to Folder”
p.73 “Sending a Stored File”

Ricoh Aficio MP C3000 Specifications

General

Resolution	600 x 600 dpi
Copy Resolution	600 x 600 dpi
Duplex	Standard
Scan to	Email, Folder, USB
Fax	Optional
Modem Speed (Fax)	33.6 Kbps
Hard Disk Drive	40 GB
Print Speed	30 ppm
Type	Digital Color Copier
Functions	Copy, Print, Scan
Original Size	Up to 11" x 17"
Paper Size	A5 to A3
Paper Weight	52 to 256 g/m²
Document Feeder	50 sheets
Scan Resolution	600 dpi
Memory (Standard)	768 MB RAM
Power Requirements	120V, 60Hz
Network Connectivity	Ethernet 10/100Base-TX
Operating System Compatibility	Windows, Mac OS
First Copy Time	6.5 seconds or less
Scan Speed	41 images per minute