Appendix
150
7
Folder transmission
The following table tells you the maximum values of the Scan to Folder function
settings.
Simultaneous Transmission
The following table tells you the maximum values of settings for using the E-
mail and Scan to Folder functions simultaneously.
Item Maximum value Comments
Number of path name charac-
ters on SMB
128 alphanumeric charac-
ters
-
Number of user name charac-
ters on SMB
64 alphanumeric charac-
ters
-
Number of password charac-
ters on SMB
64 alphanumeric charac-
ters
-
Number of server name charac-
ters on FTP
64 alphanumeric charac-
ters
-
Number of path name charac-
ters on FTP
128 alphanumeric charac-
ters
-
Number of user name charac-
ters on FTP
64 alphanumeric charac-
ters
-
Number of password charac-
ters on FTP
64 alphanumeric charac-
ters
-
Number of path name charac-
ters on NCP
128 alphanumeric charac-
ters
-
Number of user name charac-
ters on NCP
64 alphanumeric charac-
ters
-
Number of password charac-
ters on NCP
64 alphanumeric charac-
ters
-
Number of addresses you can
specify at the same time
50 addresses You can specify a maximum of
50 directly entered destinations.
Sendable file size 2000 MB per file -
Item Maximum value Comments
Number of destinations you can
select for E-mail and Scan to
Folder
550 addresses -
Number of destinations you can
select for sending by e-mail
500 addresses You can specify a maximum of
100 directly entered destina-
tions, including LDAP search-
retrieved destinations.
Number of destinations you can
set for sending by Scan to Fold-
er
50 addresses -
To Next Page
Loading...
Need help?
General