Storing Files Using the Scanner Function
62
3
I Press [OK].
J Press {Start}.
If you are scanning batches, place the next originals.
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult the
administrator.
❒ By pressing [Send & Store], you can simultaneously store scan files and send
them. For details, see "Simultaneous Storage and Sending by E-mail", "Si-
multaneous Storage and Sending by Scan to Folder", and "Simultaneous
Storage and Delivery".
❒ If a destination or sender has been selected, you cannot press [Store Only].
❒ To cancel scanning, press {Clear / Stop}.
Reference
p.105 “Various Scan Settings”
p.115 “Adjusting Image Density”
p.116 “Setting of Original Feed Type”
p.63 “Specifying File Information for a Stored File”
p.32 “Simultaneous Storage and Sending by E-mail”
p.57 “Simultaneous Storage and Sending by Scan to Folder”
p.98 “Simultaneous Storage and Delivery”
To Next Page
Loading...
