8. Press [Change] for “Domain Name”, enter the name of the domain controller to be
authenticated, and then press [OK].
9. Select the “Printer Job Authentication” level.
If you select [Entire] or [Simple (All)], proceed to “Selecting Entire or Simple (All)”.
If you select [Simple (Limitation)], proceed to “Selecting Simple (Limitation)”.
For a description of the printer job authentication levels, see “Printer Job Authentication”.
• p.37 "Logging on Using Administrator Authentication"
• p.39 "Logging off Using Administrator Authentication"
• p.65 "Selecting Entire or Simple (All)"
• p.68 "Selecting Simple (Limitation)"
• p.94 "Printer Job Authentication"
Selecting Entire or Simple (All)
If you select [Entire], you cannot print using a printer driver or a device that does not support authentication.
To print in an environment that does not support authentication, select [Simple (All)] or [Simple (Limitation)].
If you select [Simple (All)], you can print even with unauthenticated printer drivers or devices. Specify this
setting if you want to print with a printer driver or device that cannot be identified by the machine or if you
Windows Authentication
65
To Next Page
Loading...
