Entering Characters
This section describes how to enter characters using the control panel when configuring the machine's
settings.
Use the keys as follows to enter characters.
To enter a digit
Press a number key.
To delete a character
Press the [ ] key.
To enter a fax number
• To enter a number
Use the number keys.
• To enter characters other than digits
" ": Press [ ].
" ": Press [ ].
Pause: Press the [Pause/Redial] key. "P" appears on the screen.
Space: Press the [
] key.
To enter a name
Letters, numbers, and symbols can be entered using the number keys.
To enter two characters that use the same number key successively, wait briefly after entering the
first character.
To Next Page
Loading...
