Configuring the Administrator Settings
Click [Administrator Tools] to display the page for configuring the administrator settings.
This page contains the following tabs: [Administrator], [Reset Settings], [Backup Setting], [Restore
Setting], [Set Date/Time], and [Energy Saver Mode].
Configuring the Administrator Password and E-mail Address
Click the [Administrator] tab on the administrator settings page to configure the administrator password
and e-mail address.
Administrator Settings
Item Description
Change Password Check this to configure the administrator password.
New Password Enter the new administrator password. Can contain up to 16 characters.
Confirm New Password Enter the same password again, to confirm.
Change E-mail Address Check this to configure the administrator e-mail address.
Administrator E-mail
Address
Enter the administrator e-mail address.
If the machine’s e-mail address is not configured in the [SMTP] page, this
address will be used as the sender's address of e-mails sent from this
machine, such as notification e-mails and Internet Faxes. Can contain up to
64 characters.
• Administrator e-mail address can only be configured with the Type 2 model.
Configuring the Administrator Settings
347
To Next Page
Loading...
