3-2. Scanner
3-2-1. ADF Clutch
1.
2.
3.
4.
Remove the top and rear covers (see sec-
tion 3-1).
Remove cover [A] (2 screws).
Remove the ADF clutch [B] (1 E-ring).
Bring the cable back through the machine
from the FCU.
Cautions:
Place stopper [C] astride bracket [D] as
•
shown, so that rotation of the clutch body
will be prevented.
•
Keep the ADF clutch harness away from
gears and timing belts.
3-3