2-3. Service Level Functions
1. Function List
No
Function
Explanation
60
Dedicated Transmission Parameters Destinations programmed as Quick Dial Keys or
Speed Dial Codes can be given dedicated
parameters (such as tx level) that will override the
machine’s settings when sending to that address.
Consult technical services before changing any of
these settings. See page 2-14.
75
Printing all memory files
All files in the memory, including confidential recep-
tions will be printed. This is only available in the
FAX85. See page 2-17.
90
Bit switch programming Use this function to change a bit switch setting. See
page 2-17.
91
Display and edit RAM data Use this to display the contents of a RAM address,
and to change it if necessary. This function cannot be
used to rewrite remote terminal RAM. See page 2-18.
2-12
92 System report
This report lists information such as NCU parameters
and bit switch settings. See page 2-19.
To Next Page
Loading...
