Ricoh FACSIMILE FAX77 - Type 85; Installation Procedure; Preparation; Installing the Memory

6-1. Installation Procedure
The capacity of the Ricoh Memory Option Type 85 is 0.5 Mbyte. The FAX80 cannot be upgraded with this
memory option. The installation procedure is as follows; the same procedure can be used for removal and re-
placement also.
1. Preparation
1. Print out a polling file list and a memory list (Functions 72 and 74).
2. Print out any confidential or substitute reception files.
2. Installing the Memory
1.
2.
3.
4.
5.
Give these to the user.
Turn off the power, then unplug the machine.
Remove the right cover (2 screws)
- see page 3-2 for full details.
Install the memory option on the FCU board.
Reassemble the machine.
Plug in the machine, then switch on the power while pressing Clear and 0 (zero). This clears the
memory and memory-related RAM addresses.
There is no need to reprogram any bit switches, RAM addresses, or other items.
6-1