4. Printing All Memory Files - Function 75
1. Enter the service mode. See page 2-13.
2. Press the Function key, enter 75, then press Yes.
3. Press #, then Yes.
4. Press Copy.
All files in the memory, including confidential messages, will be printed. The memory will not be erased. To
clear a confidential file which has an unknown password, you must switch the machine off to clear all files
from the memory.
5. Bit Switch Programming - Function 90
The bit switches are explained in section 2-5. Consult technical services before changing a bit switch.
WARNING
Do not adjust a bit switch that is described as “Not used”, as this may
cause the machine to malfunction or to operate in a manner that is
not accepted by local regulations. Such bits are for use only in other
markets, such as Japan.
1. Enter the service mode. See page 2-13.
2. Press the Function key, enter 90, then press Yes.
2-18
To Next Page
Loading...
