3-2-5. Xenon Lamp
1.
2.
3.
Remove the top and rear covers (see sec-
tion 3-1).
Remove the ADF clutch (see section 3-2-
1) and the lower ADF guide plate (see
section 3-2-2; remove plate [E]).
Remove the exposure glass holders [A]
(2 screws) and the exposure glass.
Caution: Keep the exposure glass in a safe
place.
4. Remove the lower scanner guide plate [B]
(4 screws).
5. Remove the R1 roller [C] (2 E-rings) and
the timing belt.
3-10
To Next Page
Loading...
