2-2. User Level Programming
1. Function List
To select a function, press the Function key, then enter the number at the ten key pad, then press Yes.
No
Function
Details
50 Clock adjustment
See page 1-19 for full details.
51
Tx/Rx page counter
Tx/Rx pages only. Press Function after viewing.
52
Scan/Print page counter Includes pages scanned/printed in copy mode. Press
Function after viewing.
53
Page count on/off
Turns on/off the PAGES:00 KPAD/N prompt. Press 1
to turn it on, or 2 to turn it off.
54
Department code on/off Turns on/off the DEPT CODE0000 KPAD/N prompt.
Press 1 to turn it on, or 2 to turn it off.
55
Volume adjustment
Adjusts monitors for on hook dial, transmission, and
reception. Press # to raise the volume, * to lower,
and Yes when it is correct.
56 Transmission report on/off
Press 1 to turn it on, or 2 to turn it off.
2-5
To Next Page
Loading...
