3. RTI, TTl, and CSI - Functions 63, 64, and 65
These three labels identify your terminal at the other end.
RTI (Remote Terminal Identification): This is displayed on the operation panel at the other end during com-
munication.
TTl (Transmit Terminal Identification): This printed at the other end on the top of each page that you send.
CSI (Called Subscriber Identification): This is used instead of the RTI during communication with another
maker’s machine.
- RTI (Function 63) -
1. Make sure that the machine is in standby mode.
2. Press Function, enter 63, and press Yes.
3. Type in the RTI:
- FAX77 -
Letters - Quick Dial keys and Speed Dial key
Each key can be used to enter one of two characters, using Speed Dial key as shift key.
Exampe : ’P’ - Press Speed Dial then Press Quick Dial 01
See the Table of Letters with Quick Dial keys on the next page.
Numbers - Ten-key pad
Space - Pause/Redial key
Symbols and punctuation - Press # consecutively until the required symbol appears. Press * if you go
past the required symbol. Then press Clear to move the cursor.
You cannot move the cursor backwards.
1-20
To Next Page
Loading...
