No
Function
Explanation
93
RAM printout
94
Error code display and service
report printout
95
Serial number programming
96 Test Mode
97
Programming the thermal head
pulse width and size
98
Programming NCU parameters
Use this to print a table of RAM address contents.
See page 2-19.
The most recent 32 error codes can be displayed.
The service report lists the most recent 32 error
codes and gives information on the 10 most recent
communications that experienced errors. See page 2-
20.
When installing the unit, use this function to program
the machine’s serial number. See page 2-20.
Use this to enter the system test mode. See page 2-
22.
Use this function whenever you install a new thermal
head or SRAM board. See page 2-21.
Use this to adjust NCU parameters for ringing detec-
tion and dialling. See page 2-21.
99
Maximum address limitation
2-13
To Next Page
Loading...
