No
Function Details
62
Programming the Polling ID
See page 1-21 for details.
63
Programming the RTI
See page 1-20 for details.
64
Programming the TTl
See page 1-20 for details.
65
Programming the CSI
See page 1-21 for details. In Italy and W. Germany,
this is a service function.
66
Clearing polling files
Enter the file number. Then press Clear.
67 Clearing memory files (FAX85 only)
Enter the file number. Then press Clear.
68
Reception mode switching timer This is a timer that automatically switches the
machine between Auto and Manual Receive modes
For each day of the week, two timers can be
programmed (for example, from Auto to Manual at 8
am, and back to Auto at 5 pm). Press # until the re-
quired day is displayed. To set the timers, press
Clear to move the cursor, type in the time at the ten
key pad, and press # to change PM to AM or vice
versa. You can also enable/disable the timer with
function 68.
69
Not used
To Next Page
Loading...
