No
Function
Details
80
81
82
83
84
85
86
Programming the machine’s
telephone number
Telephone line type selection
Switching TTl on/off
Switching ECM tx on/off
(FAX80/85 onIy)
Password (FAX85 only)
Programming Authorized Reception
Programming the Forwarding ter-
minal telephone number (FAX85
only)
See page 1-22 for details.
See page 1-19 for details. In Italian, German, and
Universal versions, this is a service function.
Switch this off if you want the other end to receive
exact copies of the original, without the TTl at the top
of the page. Press 1 to turn it on and 2 to turn it off.
Press 1 to turn it on and 2 to turn it off.
See page 1-22 for details.
Type in the RTI or CSI of the fax terminals that can
send fax messages to this machine. Press Yes to
store the RTI/CSl. Up to 30 terminals can be stored.
For non-Ricoh terminals, the CSI must be stored; for
Ricoh terminals, the RTI must be stored. See the
Journal for the correct RTI or CSI to store.
Type in the number, then press Yes.
2-9
To Next Page
Loading...
