Ricoh G700SE - Communication Mode: Choosing a Wireless Connection Method; Import Communication Setting: Loading a Host List; Send To: Choosing a Host; Send Status: Choosing When to Select a Host

102
Expanded Settings Menu
10
Communication Mode
Choose whether data transmitted using [File Send] (GP.74) and quick send
(GP.104) are sent via wireless LAN ([W-LAN]) or Bluetooth® ([Bluetooth]).
Import Communication Setting
GP.125
Highlight [Yes] and press MENU/OK to load a host list previously created and
transmitted to the camera using the supplied ST-10 software (GP.123). Host lists
are required when sending files from the camera to a computer via a wireless LAN
(GP.112).
Send To
View, edit, or choose a host from a host list.
Note ----------------------------------------------------------------------------------
If you do not select a host using this option before connecting to a wireless LAN,
the camera will attempt to connect to the first host in the list when pictures are
sent with [Off] selected for [Send Status] or quick send is used with [1Touch]
selected for [Quick Send Mode] (GP.109).
Send Status
Select [On] to select a host every time pictures are sent, [Off] to send pictures to the
host selected with [Send To]. Choose [Off] if you always use the same host.
Simple Connection
GP.128
Use a simple connection method to connect to the wireless host or access point
when sending data via wireless LAN.