Ricoh G700SE - Configuring the Host

113
Wireless Networks
12
Caution ---------------------------------------------------------------------------------
• The camera’s wireless transmitter has a maximum range of about 30 m (100 ft.);
ensure that there are no obstacles between the two devices.
• The supplied ST-10 software (available for Windows only) is required for
connection to a wireless LAN.
Configuring the Host
Before images can be transferred to a host computer or other
device over a wireless network, a host list containing the necessary
connection information must be copied to the camera. The supplied
ST-10 software is used to configure the host computer for transfer.
Note -------------------------------------------------------------------------------------
See P.151 for information on installing ST-10.
1
Start ST-10.
• Start ST-10. In the Windows start menu, select [All Programs] >
[Programs] > [DC Software] > [ST-10].
2
Click [All Detailed Setups].
• The ST-10 window will be displayed.
Click [All Detailed Setups].