114
Wireless Networks
12
3
Click the desired tab.
• In the [Detailed Setups for selections]
dialog, choose from the following
tabs:
- Network: Enter an IP address.
- Wireless LAN: Adjust wireless LAN
settings.
- FTP Send: Adjust ftp settings.
- Dial-up/Mail Config./Address
Book: Not required; the camera
does not support dial-up
connections or e-mail.
Note -------------------------------------------------------------------------------------
• If the computer is not currently configured for ftp, use the supplied SR-10
software to create an ftp server (GP.120).
• Advanced settings for some options can be accessed by clicking [Detail].
4
Click [Add].
• Click the [Add] button under [Setup
Name] to display the [New Name for
the Setup] dialog.
5
Enter a name.
• Enter a name for the new
configuration and click [OK].
6
Adjust settings.
• Adjust settings as described on P.116.
The configuration currently selected in the [Setup Name] list can be
renamed by clicking [Rename] or deleted by clicking [Delete]. Click
[Apply] to save changes.
To Next Page
Loading...
