Ricoh G700SE - Transferring Images During Playback (Bluetooth)

107
Bluetooth®
11
Transferring Images During Playback
(Bluetooth®)
Images can be copied to Bluetooth® devices using the [File Send]
option in the playback menu (GP.72).
1
Select [File Send].
• Select [File Send]. If you intend to copy
only one picture, display the picture full
frame before proceeding. Highlight
[File Send] in the playback menu
(GP.72) and press $ to display a list
of devices (if this is the first time you
have used Bluetooth®, a confirmation
dialog will be displayed; highlight [Yes] and press MENU/OK).
2
Choose a host.
• Press ! or " to highlight a device and
press MENU/OK (to view a description
of the highlighted device, press $; to
remove the device from the list, press
D). If the desired device does not
appear, press ADJ./MEMO to refresh the
list.
3
Transfer images.
• Highlight [Send One] (send only the
current image) or [Send All] (copy all
images), and press MENU/OK. Enter a
password if prompted (GP.106). A
progress indicator will be displayed.
4
Press MENU/OK when transfer is complete.
• A message will be displayed when transfer is complete. Press MENU/
OK to return to playback.
Transferring Multiple Selected Images -----------------------------------------
To transfer multiple selected images, select thumbnail view (GP.38) before
selecting [File Send]. After choosing a device as described in Step 2, highlight still
images and press MENU/OK to select or deselect. Press DISP. when your selection
is complete. A confirmation dialog will be displayed; highlight [Yes] and press
MENU/OK to transfer the selected images.