Ricoh G700SE - Bluetooth-Equipped GPS Units

137
GPS
13
Bluetooth®-equipped GPS Units
Bluetooth®-equipped GPS units supply GPS data to the camera
wirelessly.
1
Select [Bluetooth Serial].
• Highlight [Bluetooth Serial] in the expanded settings menu
(GP.98) and press $ (if this is the first time you have used
Bluetooth®, the dialog shown at right will be displayed; press #
or $ to highlight [Yes] and press MENU/OK to scan for available
Bluetooth® devices).
2
Highlight a device.
• Press ! or " to highlight a device (to
view a description of the device, press
$; to remove the device from the list,
press D). If the desired device does not
appear, press ADJ./MEMO to refresh the
list.
3
Press MENU/OK.
• Press MENU/OK. The camera will show
connection status. If prompted for a
password, press MENU/OK and enter a
password as described on P.106. When
a connection is established, GPS data,
a Bluetooth® antenna icon, and a GPS
icon will appear in the shooting display.
4:
3 F
3 F4:3 F
4:3 F
9999
99999999
9999
11
1
359.2˚//NNW/mag
359.2˚//NNW/mag359.2˚//NNW/mag
359.2˚//NNW/mag
E:
139˚
139˚E:139˚
E:139˚
N:
035˚
035˚N:035˚
N:035˚
X3
(
4
)
X3
(
4
)
X3
(
4
)
2d
2d2d
2d