Ricoh G700SE - Connecting Using [Scan]

130
Wireless Networks
12
Connecting Using [Scan]
1
Select [Scan] for [Simple Connection].
• Highlight [Simple Connection] in the expanded settings menu
(GP.98) and press $, and then press ! or " to highlight [Scan]
and press $. A message will be displayed while the camera searches
for wireless LAN access points; when the search is complete, a list of
the available access points will be displayed.
2
Select an access point.
• Press ! or " to highlight an access point and press MENU/OK. The
camera will attempt to connect using the wireless LAN settings
last entered for [Scan]. If the attempt is successful, connection
information will be displayed; press MENU/OK to return to the
expanded settings menu.
• If no previous settings exist or if the settings are incorrect, a message
will be displayed prompting you to enter wireless LAN information
manually; highlight [OK] and press MENU/OK to display wireless LAN
settings (GP.117). Press ! or " to highlight items and press $ to
select. Edit settings, using the on-screen keyboard where required,
and press MENU/OK to connect when settings are complete.
Connection information will be displayed if the camera is able to
connect; press MENU/OK to return to the expanded settings menu.
Caution ---------------------------------------------------------------------------------
Upload will be cancelled if the camera is unable to connect at current settings.
The camera will not attempt to connect to the host selected for [Send To]
(GP.102).