Ricoh G700SE - Page 127

126
Wireless Networks
12
2
Choose a destination.
• Navigate to the desired folder on the computer hard drive and
enter a file name (note that although you can use any name, you
will need to rename the file “SYSTEM.PRM” when copying it to the
memory card in Step 5). Click [Save]. You will be prompted to enter a
password.
3
Enter a password and click [OK].
• The host list will be saved to the selected destination and a message
will be displayed.
Note -------------------------------------------------------------------------------------
Host lists stored on the computer hard drive can be opened for editing using the
ST-10 [Open file] option. Enter the password you used in Step 3 when prompted.
A warning will be displayed if the password is incorrect.
4
Exit ST-10.
• Click [OK] in the ST-10 window to exit ST-10.
5
Copy the host list to the memory
card.
• Insert the memory card in a card reader
or card slot and copy the host list to the
“SYSTEM” folder on the memory card.
Rename the file “SYSTEM.PRM”.
6
Insert the memory card in the camera.
7
Select [Import Communication Setting].
• After turning the camera on, select [Import Communication Setting]
in the expanded settings menu as described in Step 9 on P.124.
Caution ---------------------------------------------------------------------------------
Only one host list at a time can be read from a memory card.
Note -------------------------------------------------------------------------------------
The host list can also be transferred to the camera by direct USB connection
(GP.123).