124
Various Shooting Functions
1
You can adjust the light intensity of internal flash. You can set the
light intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1
Displaying the shooting menu.
• For the operating procedure, see P.103.
2
Press the " button to select
[Flash Expo. Comp.] and press
the $ button.
• The flash exposure compensation bar
appears.
3
Press the !" buttons to make
the setting.
4
Press the MENU/OK button.
• The setting appears on the screen
except when the flash mode is set to
[Flash Off] and [Manual Flash].
Note ----------------------------------------------------------------------------------------------
• When the flash mode is set to [Manual Flash], the [Man. Flash Amount] setting
(GP.125) will be enabled, the [Flash Expo. Comp.] setting will no longer be
enabled.
• For information on how to use the flash, see P.51.
Caution------------------------------------------------------------------------------------------
Flash exposure compensation may not work outside the flash range (GP.51).
Adjusting the Light Intensity of the
Flash (Flash Expo. Comp.)
0 . 0
To Shoot
Ok
To Next Page
Loading...
